Zhone 3920Plus Manual de Instruções descarregar pdf (Página 215)

Dial Access Security

12-93920-A2-GH30-40 October 1998

Table 12-1 describes the settings of the Edit Table Password group options.

Table 12-1

Edit Password Table Group Options

PsWdType xxxx

Nxt Cleared DTE_Entry VF_Entry VF_plus_DTE

Password Type. Indicates whether this index location is configured for VF-side password, DTE-side password, or both.

Cleared displays for an index location that contains no valid entry. Note that this configuration option only identifies the

type of password used. For proper operation, the type of password selected must be consistent with the type of security

used. Refer to the Set Answer Security group option found later in this chapter.

Cleared – Indicates that the index location does not contain any valid selections and is currently unused.

DTE Entry – Indicates that this index’s password is configured for DTE-side password entry. Special requirements apply

when using DTE passwords if the Set Answer Security option (Answer Security mode) is set to VF_&_DTE. Refer to the

note following VF plus DTE.

VF Entry – Indicates that this index’s password is configured for VF-side password entry. This selection requires that

the Set Answer Security option (Answer Security mode) be set to VF_&_DTE.

VF plus DTE – Indicates that both layers of password entry are used with this index’s password. This location is

configured so that the answering modem sends a prompt for the DTE-side password after receiving a valid VF-side

password. This setting requires that the Set Answer Security option be set to VF_&_DTE.

NOTE: If the Set Answer Security option (Answer Security mode) is set to VF_&_DTE, special requirements apply in

order to use passwords with their type set to DTE_Entry. The originating caller must first enter a valid VF

password. If the VF password entered is configured in the security database with the type VF_plus_DTE, the

user is then required to enter a password configured in the database table with the type DTE_Entry.

Edit PsWd xxxx

Nxt " yyyyyyyy or zzzzzz

This configuration option does not appear if Password Type is configured for Cleared.

Edit Password. Allows the password associated with this index to be changed.

xxxx – Indicates the current index location value.

yyyyyyyy – Indicates the current password value for this index. If the Password Type is VF_Entry or VF_plus_DTE,

then the password value is an 8-digit decimal number.

zzzzzz – Indicates the current password value for this index. If Password Type is configured for DTE_Entry, then the

password value is a 6-character alphanumeric number.

Save Edit? xxxx

Edit Save Yes No

Save Edit. Saves any changes made in the EditPassWdTable group.

xxxx – Indicates the current index field value.

Edit – Returns the LCD to the Password Type configuration option and does not save any changes made to the index or

password table.

Save – Saves changes made to the index or Password Table. Once selected, the Select Index screen appears and

increments to the next index value.

Yes No – Appears only if changes are made to any of the options within the Password Table and a menu level key is

pressed before reaching the Save Edit? configuration option. After deciding whether or not to save changes, the LCD

displays Select Index and increments to the next index value.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 353 354

Zhone 3920Plus Manual de Instruções Página 215

Comentários a estes Manuais

Zhone 3920Plus Manual de Instruções Página 215

Comentários a estes Manuais

Manuais e produtos relacionados com Modems Zhone 3920Plus