
COMSPHERE 392xPlus Modems
7-8 October 1998 3920-A2-GH30-40
Press F1 (Service_Line) to switch the modem from its normal dial line to the service line.
F1
Service_Line
Command Complete
F2
F3
The message Command Complete appears. Now, when the modem places a call, instead of
using the dial, the call is placed on the service line.
To disconnect the modem from the service line and resume normal operation, press the
key
(returning to Control branch). From the Control branch, press the
key until DiscServiceLine
appears.
F1
Control:
DiscServiceLine
F2
F3
Press F1 (DiscServiceLine). The call and service line disconnect and the message Command
Complete appears.
Download Software
The Download Software function sets parameters within the modem when transferring firmware
to one or more modems or when receiving firmware upgrades from a locally attached PC-based
controller. The latter is only performed by service representatives.
There are two selections under Download Software: Clone Remote and To Local via DTE. Clone
Remote is used to transfer an exact copy of the firmware currently stored in a 392xPlus modem
to either one or more remote 392xPlus modems or one or more DC-attached 392xPlus modems.
When implementing a Clone Remote operation, the following is true:
• The Clone Remote function only operates properly if the remote modems are connected to
the local modem via a leased-line or an established dial-line network.
• The Clone Remote will not appear on the LCD if the modem is not configured for leased
lines and a dial-line connection does not exist.
For more information on Clone Remote operation, refer to Implementing a Clone Remote
Operation later in this section.
The second selection appearing on the LCD is To Local via DTE. This function permits
firmware upgrades to be transferred to a 392xPlus modem. This type of download requires a
locally attached PC controller to be connected to the modem’s DTE port as well as special
download software. Any downloads using this selection are intended to be performed by
service representatives only.
Comentários a estes Manuais