Zhone 4821-A2 Informações Técnicas descarregar pdf (Página 38)

3. Commands

3-14 July 2004 4821-A2-GB21-00

Configure IGMP Snooping Leave Delay

Configure IGMP Snooping Leave Join Delay

configure igmp {port_id} snooping leave-delay {delay}

Minimum Access Level: Administrator

The configure igmp snooping leave-delay command specifies the period of time during which a

multicast stream will continue to be forwarded on an interface after receipt of an IGMP leave message for

that stream.

port_id – Identifies the IGMP DSL port to be configured. Enter all for all ports.

delay - The amount of time, in tenth of seconds, that the multicast stream will continue after the receipt

of a leave message. The default value is 3. The range is 0 to 25.5 seconds in units of tenths of seconds.

Example:

PDYN# configure igmp 1 leave-delay 3

configure igmp {port_id} snooping leave-join-delay {delay}

Minimum Access Level: Administrator

The configure igmp snooping leave-join-delay command specifies the period of time during which

new multicast streams will not be forwarded on a port following a Leave Message for another stream on

that port.

port_id – Identifies the IGMP DSL port to be configured. Enter “all” for all ports.

delay - The amount of time, in tenths of seconds, that a new multicast stream on a port is delayed

following the receipt of a leave message. The default value is 3. The range is 0 to 25.5 seconds in units of

tenths of seconds.

Example:

PDYN# configure igmp 1 leave-join-delay 3

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 183 184

Sem comentários

Zhone 4821-A2 Informações Técnicas Página 38